Contact Us

Wuxi Yongchang Lifting Equipment Co.,Ltd

Add: No.1 Gangwang Road, Donggang Town, Xishan District, Wuxi, Jiangsu, China

Contact: Kira

Mob: +86-18306184512

Tel: +86-510-82302707

E-mail: kira@yc-lift.com

Skype: Kira Lee YC

Home > Knowledge > Content
Normal questions about manual chain hoists
Feb 12, 2019

How should the storage chain hoist be fixed?

If the inspection is qualified or unqualified, it shall be stored in sections and have obvious regional identification.


Why is it that the chain of the chain hoist should not be used too hard?

When operating the chain hoist, the strength of the zipper should be uniform, the speed should be moderate, not too strong, to prevent the chain from being detached and the chain.


Why is the zipper direction consistent with the direction of the sprocket when operating the chain hoist?

Regardless of the operation of the chain hoist in any direction, the direction of the zipper should be consistent with the direction of the sprocket to prevent the chain from being undocked.


Why can't I increase the number of people while pulling the gourd?

When the chain hoist is not moved, the cause should be ascertained, and the number of people cannot be arbitrarily increased to prevent accidents caused by overloading.


Why do you want to tie the chain to the lifting chain when the chain hoist is hanging?

If the chain hoist in the hoisting has a long stopover time, the chain should be tied to the lifting face to prevent the self-locking weight from falling.


How should the storage chain hoist be fixed?

If the inspection is qualified or unqualified, it shall be stored in sections and have obvious regional identification.


Why do you have to use a good chain hoist when lifting large items?

If the chain hoist fails, it will cause injury outside the personnel.


Why should you use a chain hoist to lift a large piece of no less than two people?

Prevent twisted chains or missed hands and cause large pieces to get out of control.


How should the storage chain hoist be fixed?

If the inspection is qualified or unqualified, it shall be stored separately and with obvious regional identification.


Previous: How to judge the quality of chain hoist chain?

Next: Instructions for using the 1000 LBS hand winch